MOT Status
ValidMileage
95,050 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))
Nearside Front Outer Sill showing signs of corrosion
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Inner Sills showing signs of corrosion
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))
Nearside Front Outer Sill showing signs of corrosion
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Inner Sills showing signs of corrosion
Front Subframe mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both rear bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sill (6.2.2 (d) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Front Power steering pipe/hose excessively corroded leaking (2.1.5 (g) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper rear arch (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Power steering pipe/hose slightly corroded along side gearbox (2.1.5 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Power steering pipe/hose slightly corroded along side gearbox (2.1.5 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside rear outer sill 30cm from suspension mounting (6.2.2 (d) (i))
Child Seat fitted not allowing full inspection of adult belt x2
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security offside rear outer sill (6.2.2 (d) (i))
advisory brake fluid a bit ditry
coil spring broken offside front (2.4.C.1a) DANGEROUS
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Tyre worn close to the legal limit nearside front on 2mm (4.1.E.1)
Tyre worn close to the legal limit offside front on 2mm and worn inner edge second skin (4.1.E.1)
advisory no coolant in expansion tank and coolant leak
o/s/f suspension arm bush perished
o/s/f tyre smooth inside edge
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
advisory both front brake discs are in poor coindition weakenend brake suface reduced
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside front tyre perishing
Nearside front tyre wearing on inner edge
Both rear tyres perished
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside front tyre perishing
Nearside front tyre wearing on inner edge
Both rear tyres perished
Both back tyres perishing
Both front brake disc`s coroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside front tyre perishing
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside front and both rear tyres deteriorated
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside front and both rear tyres deteriorated
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ET06 UJX is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying ET06 UJX, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ET06 UJX?
You can check the full history of ET06 UJX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ET06 UJX registered?
ET06 UJX is a 2006 Ford Ka, first registered on 28 July 2006.
Is ET06 UJX safe to buy?
The MOT history for ET06 UJX shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ET06 UJX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ET06 UJX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.