MOT Status
ExpiredMileage
181,125 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen washer not working (3.5 (a))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Offside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Front Anti-roll bar insecurely attached (5.3.3 (a) (i))
Nearside Front Drag link end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Offside Front Anti-roll bar insecurely attached (5.3.3 (a) (i))
Offside Front Drag link end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Chassis and underside corroding
Front Integral body structure is corroded but structural rigidity is not significantly reduced Rad frame (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated And offside front lower (5.3.4 (b) (i))
Nearside Rear Light lens damaged
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel arch (5.3.6 (a) (i))
Offside Front Windscreen damaged but not adversely affecting driver's view Centre (3.2 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Diff damp
Front Integral body structure is corroded but structural rigidity is not significantly reduced rad frame (6.1.1 (c) (i))
Front Prop shaft securing bolt missing (6.1.7 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Rear fog lamp not working (4.5.1 (a) (ii))
Trailer electrical socket wiring insulation damaged or deteriorated and likely to cause a short-circuit (4.10 (b) (ii))
Front Integral body structure is corroded but structural rigidity is not significantly reduced rad frame (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front crossmember rusty
Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front crossmember rusty
Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Fuel tank leaking (7.2.3)
Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Leaf spring fractured (2.4.B.1a)
Offside Rear Leaf spring fractured (2.4.B.1a)
Centre Exhaust system not adequately supported (7.1.1)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
centre exhaust silencer securing bracket broken but still supporting exhaust
How Reliable is the Ford Ranger?
Based on 1,687,380 MOT tests across 189,558 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ET51 XME is a 2002 Ford Ranger in Red with a 2,499cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 2002 Ford Ranger models, the average MOT pass rate is 69.7% with a typical mileage of 100,584 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ranger fails its MOT is brake pipe excessively corroded, accounting for 41,033 recorded failures. If you're considering buying ET51 XME, it's worth having these areas checked by a mechanic before committing.
The Ford Ranger typically stays on UK roads for around 27 years. At 24 years old, this Ford Ranger is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ET51 XME?
You can check the full history of ET51 XME by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ET51 XME registered?
ET51 XME is a 2002 Ford Ranger, first registered on 31 January 2002.
Is ET51 XME safe to buy?
The MOT history for ET51 XME shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ET51 XME have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ET51 XME. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.