2004 Suzuki GZ125

Drive chain slightly loose (6.1.7 (c) (i))

Front front tyre cracking in tread

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Drive chain sprocket excessively loose sprocket hub bearing (6.1.7 (c) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front front tyre cracking in tread

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Tyre worn close to the legal limit (5.2.3 (e))

movement in cush drive rubbers

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

front tyre showing sign of cracking - sidewall

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake master cylinder insecurely mounted (3.2.B1a)

Nearside Front Footrest insecure securing nut missing (6.2.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

front tyre showing sign of cracking - sidewall

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have slight free play (2.3.5b)

Has close to no reserve travel.

Rear wheel bearings have slight free play (2.4.A.2c)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake caliper(s) insecure (3.2.A1j)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Brake caliper(s) securing bolt(s) missing (3.2.A1j)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front wheel bearings have slight free play (2.3.5b)