MOT Status
ExpiredMileage
212,808 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Nail in tyre ()
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Front Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Back of inner wheel arch (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Nail in tyre ()
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Front Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))
Offside Front Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch (6.2.2 (d) (i))
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch (6.2.2 (d) (i))
Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Behind sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Back of cab (6.1.1 (c) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair
Underside corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Bonnet secondary catch faulty
Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))
Underside corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Emissions not tested due to fuel leak (8.2.2.2 (e))
Fuel system component leaking (6.1.3 (b) (i))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Bonnet secondary catch faulty
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Underside corroded
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Bonnet secondary catch seized
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive bulkhead (7.1.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded floor / inner wing (1.1.21 (e) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Bonnet secondary catch seized
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive bulkhead (7.1.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
chassis and body mounts corroded
dip switch sticking
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Rear Outline marker lamp missing (4.2.1 (a) (ii))
Offside Rear Outline marker lamp missing (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Bonnet primary retaining device slightly deteriorated secondary catch seized (3.1 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Brake fluid warning lamp illuminated (3.6.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Seat belt attachment fitting fractured lock arm broken (5.2.3)
Offside Rear Outer Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Under-trays fitted obscuring some underside components
n/s/r light unit damaged
o/s/r + n/s/r bump stops missing
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
offside outer rear tyre worn close to wear bars
offside side marker
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake warning lamp on
offside outer rear tyre worn close to wear bars
offside side marker
Bonnet skin debounding from frame
Curb damage to nearside rear outer tyre
Front sub frame destorted (Impact damage)
Nearside fron cab mount debounding
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front no plate deteriorating
Nearside Rear Brake cable locking device missing (3.5.1l)
Nearside Rear Dropside cannot be secured in the closed position (6.4.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Side repeater not working (1.4.A.2c)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Nearside rear for lamp inop
Nearside fron cab mount debounding
Bonnet skin debounding from frame
Both rear lamp lens damaged
Brake warning lamp on
Bulb warning lamp on
Clutch pedal rubber missing
Clutch/hydrolic fault (cruntching into gears)
Curb damage to nearside rear outer tyre
Exhaust mounts cracking and weak
Front discs worn with lardge lip
Front pads worn to sensors
Front sub frame destorted (Impact damage)
Nearside rear wheel arch inscure (touching tyre)
Offside front most side marker lamp missing
Offside wide angle mirror glass damged
Posative battery termanal corred
Rear discs worn with lardge lip
Washer bottle cap missing
Nearside Front Upper Front position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)
How Reliable is the Iveco Daily 35C12 Mwb?
Based on 31,206 MOT tests across 2,188 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EU07 TWC is a 2007 Iveco Daily 35C12 Mwb in White with a 2,287cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2007 Iveco Daily 35C12 Mwb models, the average MOT pass rate is 67.3% with a typical mileage of 110,685 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily 35C12 Mwb fails its MOT is registration plate lamp not working, accounting for 1,412 recorded failures. If you're considering buying EU07 TWC, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily 35C12 Mwb typically stays on UK roads for around 21 years. At 19 years old, this Iveco Daily 35C12 Mwb is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EU07 TWC?
You can check the full history of EU07 TWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EU07 TWC registered?
EU07 TWC is a 2007 Iveco Daily 35C12 Mwb, first registered on 8 August 2007.
Is EU07 TWC safe to buy?
The MOT history for EU07 TWC shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EU07 TWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EU07 TWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.