2008 Iveco Daily 35S14 LWB

Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner rear lower bush (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement rear lower bush (5.3.4 (a) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arche inner top (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced body mount flinch plate (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arche upper (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced general corrosion on chassis (6.1.1 (c) (i))

Front Headlamp aim unable to be tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Service brake excessively binding 73kg (1.2.1 (f))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner rear lower bush (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement rear lower bush (5.3.4 (a) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arche inner top (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced body mount flinch plate (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arche upper (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced general corrosion on chassis (6.1.1 (c) (i))

Nearside Front Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Brake pipe leaking on a hydraulic braking system to pump (1.1.11 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Central Front Lower Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Central Front Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

Nearside Rear Hand operated control valve malfunctioning (1.1.5 (d))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Central Front Registration plate insecure (0.1 (a))

Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))

Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front side marker damaged

Nearside Rear side marker damaged

Offside Front brake bind/wheel bind

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front side marker damaged

Nearside Rear side marker damaged

Offside Front brake bind/wheel bind

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

rear exhaust corroded and tail pipe incomplete

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Brake pad(s) wearing thin (3.5.1g)

all sidemarker lights not working

rear exhaust tailpipe corroded, 2 rubber exhaust mounts split,others splitting

All nearside and offside side marker lamps inop

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Clutch pedal anti-slip missing

Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

all side marker lights not working

cut in offside rear tyre outer wall

Exhaust system not adequately supported (7.1.1)

Front registration plate letter/figure incomplete (6.3.1c)

Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

all side marker lights not working

cut in offside rear tyre outer wall

all nearside & offside side marker lights not working

one front exhaust mounting rubber split & one not fitted correctly - system still secure