MOT Status
ExpiredMileage
78,421 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Rear Registration plate lamp throwing direct white light to the rear (4.7.1 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin Very close to limit. (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin Very close to limit. (1.1.13 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Brake load sensing valve stiff (3.6.E.3)
Offside Rear Nail in tyre ()
Offside Rear Nail in tyre ()
Registration plate lamp not working Both. (1.1.C.1d)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside front brake binding (3.7.B.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Radiator leaking.
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too high (1.8)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Rear Brake load sensing valve seized (3.6.E.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Emissions not tested (7.0)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Coolant leak
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Headlamp aim too low (1.8)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EU51 CVC is a 2001 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying EU51 CVC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EU51 CVC?
You can check the full history of EU51 CVC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EU51 CVC registered?
EU51 CVC is a 2001 Peugeot 206, first registered on 6 September 2001.
Is EU51 CVC safe to buy?
The MOT history for EU51 CVC shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EU51 CVC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EU51 CVC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.