2004 Yamaha Tzr 50

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp does not emit a steady light (1.3.1b)

Drive chain slightly loose (6.2.1d)

Drive chain slightly loose (6.2.1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering movement slightly 'notchy' (2.2.1a)

Front Steering movement slightly 'notchy' (2.2.1a)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre has ply or cord exposed (4.1.2a(iii)

Headlamp aim too low (1.6)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Steering headbearing has slight free play (2.2.2)

Rear Tyre valve stem slightly damaged (4.1.2c)

Drive chain excessively loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Fairings insecure and likely to impede the steering (2.1.2e)

Rear reflector on motorcycle obscured (1.4.1)

Steering movement slightly stiff (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly stiff (2.2.1b)