2008 Derbi Senda

Drive chain slightly loose (6.1.7 (c) (i))

Front & rear wheels fitted with decorative spoke covers - unable to check spokes

Not fitted with indicators - not required as 50cc machine with a max design speed of 30MPH

Rear Shock absorber has a slightly worn bush Top & bottom shock absorber bushes have slight up & down play (5.3.2 (c))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swinging arm bearings have slight play (5.3.4 (a) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front & rear wheels fitted with decorative spoke covers - unable to check spokes

Not fitted with indicators - not required as 50cc machine with a max design speed of 30MPH

Rear Shock absorber has a slightly worn bush Top & bottom shock absorber bushes have slight up & down play (5.3.2 (c))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swinging arm bearings have slight play (5.3.4 (a) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Chain guard missing ()

Front headlight kick up masked

Rear Suspension pin, bush or joint worn but not resulting in excessive movement suspension linkage (5.3.4 (a) (i))

decrotive spoke covers fitted to front and rear spoke sets

no direction indicators fitted moped with a max design speed of 30mph only

Front Position lamp not working (4.2.1 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Chain guard missing ()

Front headlight kick up masked

Rear Suspension pin, bush or joint worn but not resulting in excessive movement suspension linkage (5.3.4 (a) (i))

decrotive spoke covers fitted to front and rear spoke sets

no direction indicators fitted moped with a max design speed of 30mph only

Front brake lever short

Spoke covers fitted, front wheel bearing noisy, exhaust noisy but acceptable, front forks out of alignment left hand bar low

Wiring at front of frame worn and protective cover damaged, no rear foot rests fitted trails bike, cover loose above head lamp, front mud guard split.

Headlamp not working on dipped beam beam pattern incorrect (4.1.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Front brake lever short

Spoke covers fitted, front wheel bearing noisy, exhaust noisy but acceptable, front forks out of alignment left hand bar low

Wiring at front of frame worn and protective cover damaged, no rear foot rests fitted trails bike, cover loose above head lamp, front mud guard split.

Exhaust noisy (8.1.1 (a))

Fitted with temporary rear passenger footrests

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Shock absorber has a slightly worn bush To shock absorber bush (5.3.2 (c))

Wheel alignment slightly misaligned Handlebars slightly to right - when wheels straight (2.4 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Footrest missing R & L - rear passenger (6.2.12 (a))

Headlamp aim too low Very low (4.1.2 (a))

Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Shock absorber has a slightly worn bush To shock absorber bush (5.3.2 (c))

Wheel alignment slightly misaligned Handlebars slightly to right - when wheels straight (2.4 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Exhaust has a major leak of exhaust gases at manifold (6.1.2 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear All direction indicators missing (4.4.1 (a) (ii))

Rear Footrest missing (6.2.12 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Throttle operating incorrectly so it keep reving high (6.2.7 (a) (i))

Rear Outer Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Rear Brake pipe union leaking fluid (3.2.B4)