2008 Derbi Senda

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain excessively tight (6.1.7 (k) (i))

Fuel cap ineffective seal (6.1.3 (b) (i))

Rear reflector missing (4.8.2 (a) (ii))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate slightly loose (0.1 (a))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Handle bars out of alignment

L/H front footrest out of alignment

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Registration plate deteriorated (6.3.1d)

Registration plate margin less than the minimum requirement (6.3.4g)

Front Brake master cylinder fluid level low (3.2.B1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Handle bars out of alignment

L/H front footrest out of alignment

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment slightly misaligned. (2.5.1)