2008 Kawasaki ZX-6RR

Pre mot repairs carried out

Front Brake disc contaminated (1.1.14 (b))

Horn not working (7.7 (a))

Stop lamp switch with a delay in operation Foot (4.3.2 (a) (ii))

Front Mudguard insecure running very close to tyre at rear edge,risk of contact with tyre

Rear Mudguard insecure

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake disc contaminated both sides (1.1.14 (b))

Front Brake pad(s) contaminated both sides (1.1.13 (b))

Horn not working (7.7 (a))

Nearside Front Footrest insecure (6.2.12 (a))

Rear Wheel spindle locking device missing split pin missing (5.2.1 (d))

Engine mounting/bracket bracket missing front top near side engine mounting bolt missing,engine is a stressed member of frame (6.1.8 (a) (ii)) DANGEROUS

Front Mudguard insecure running very close to tyre at rear edge,risk of contact with tyre

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Passenger seat(s) missing at time of test

Rear Mudguard insecure

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Exhaust clamp missing

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Exhaust clamp missing

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Clutch lever shortened. (6.2.1g)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)

short clutch and brake lever fitted

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal cannot be applied smoothly (3.1.3d)

Rear Stop lamp does not illuminate immediately a brake applies rear switch not working (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever shortened. (6.2.1g)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)

short clutch and brake lever fitted

Horn not working (1.7.3a)