2011 Qingqi Qm 125-2D Stealth

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

both rear foot pegs are stuck and will not move down

cracking front tyre

exhaust mount snapped.

free play in gear lever pivots.

heal guard bolt missing front l/h

r/h handle bar bent

rear hanger r/h is cracked

Drive chain excessively tight (6.1.7 (k) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

both rear foot pegs are stuck and will not move down

cracking front tyre

exhaust mount snapped.

free play in gear lever pivots.

heal guard bolt missing front l/h

r/h handle bar bent

rear hanger r/h is cracked

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Position lamp not working (4.2.1 (a))

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Nearside Rear Direction indicator not working (1.5.1c)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear suspension bush has slight free play (2.4.A2a(i))