2003 Subaru Impreza

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

sill covers fitted

Brake pedal wearing smooth (1.1.2 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp aim projected beam image is obviously incorrect BOTH SIDES (4.1.2 (c))

Front Headlamp aim too high BOTH SIDES (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks AMP CABLE NOT FUDED AND PASSING THRU BULKHEAD (4.11 (c) (iii)) DANGEROUS

Central Front Brake pedal wearing smooth (1.1.2 (c))

Front Sub-frame corroded but not seriously weakened UNABLE TO FULLY INSPECT ALL COMPONENTS AS CAR UNDERSEALED (5.3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill/suspension arm mounting area (5.3.6 (a) (i))

Offside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Outer Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security end panel (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

both front headlight beam image poor

both rear inner wheel arches blistered with rust

Both headlamp images poor

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Brake back plate corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Both headlamp images poor

Nearside Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake back plate corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge all 4 (5.2.3 (e))

Offside Rear Brake back plate corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c))

Headlamp incorrect colour (4.1.4 (a))

Nearside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Rear fog lamp light intensity significantly reduced (4.5.4 (a))

Brake fluid warning lamp illuminated (1.1.10 (f))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside rear brake back plate corroded

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Road wheel fixing missing both sides (5.2.1 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp showing red light to the front (4.2.3 (a) (ii))

Rear Road wheel fixing missing both sides (5.2.1 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Headlamp aim too high (1.8)

All tyres wearing on inner edge

Offside Front Shock absorber has a light misting of oil (2.7.3)