2005 Suzuki Carry

Corrosion starting under and around vehicle

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Position lamp showing white light to the rear lens broken (4.2.3 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive hole outside prescribed area (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge all other tires around 3mm (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive hole outside prescribed area (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge all other tires around 3mm (5.2.3 (e))

Play in steering rack inner joint(s) ()

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms all bushes (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Play in steering rack inner joint(s) ()

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms all bushes (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both rear trailing arm bushes (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both rear trailing arm bushes (5.3.4 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

corrosion to sill area's

front number plate is damaged

Exhaust Lambda reading after 2nd fast idle outside specified limits 1.09 (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear box area (6.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

corrosion to sill area's

front number plate is damaged

exhaust system is deteriorating/heat shield at cat is loose & rattling

Nearside Front Tyre worn close to the legal limit on 2 mm (4.1.E.1)

Nearside windscreen wiper blade deteriorated

Offside Front Tyre worn close to the legal limit on 3 mm and heavy inner shoulder wear (4.1.E.1)

Offside Rear Tyre worn close to the legal limit on 3 mm (4.1.E.1)

Rear brake application moderately uneven, may need adjustment or repair

engine management lamp on

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)