2006 Peugeot 206

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim too low (4.1.2 (a))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Diesel tank strap corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp insecure (4.1.1 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Exhaust mounting defective Rear silencer rubber broken (6.1.2 (a))

Front Bumper loose not fully secure. Accident damage apparent.

Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))

Fuel tank strap very corroded

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp insecure (4.1.1 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Exhaust mounting defective Rear silencer rubber broken (6.1.2 (a))

Front Bumper loose not fully secure. Accident damage apparent.

Front Registration plate deteriorated but not likely to be misread Damaged (0.1 (b))

Fuel tank strap very corroded

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

exhaust rubber hanger broken exhaust still adequately supported

Centre Front Oil leak ()

Centre Front Oil leak ()

Horn not a continuous or uniform sound (1.6.2e)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Horn not working (1.6.2a)

Nearside Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Registration plate lamp not working (1.1.5c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)