2006 Mercedes-benz Vito

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

general underside corroded

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced and throughout underside (6.1.1 (c) (i))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Registration plate inscription illegible (0.1 (b))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced and throughout underside (6.1.1 (c) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

general under body corrosion

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe excessively corroded (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

slight corrosion on all brake pipes

Brake hose slightly deteriorated (3.6.B.4d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake hose slightly deteriorated (3.6.B.4d)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

rear no.plate deteriorating

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Registration plate lamp not working (1.1.C.1d)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

engine oil level low

offside front brake hose twisted

rear no.plate deteriorating

long handbrake travel

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

long handbrake travel

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

parking brake low on reserve travel

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)