MOT Status
ExpiredMileage
66,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions not tested due to exhaust blowing (7.3.A.1)
Front Exhaust has a major leak of exhaust gases pipe cat (7.1.2)
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill to floor (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis frame mounting (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill to chassis (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear coil spring broken (2.4.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill to chassis (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Upper Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (2.4.A.3)
Offside Rear Upper Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive boot floor (2.4.A.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
corrosion to underside of car
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front front brake binding (3.7.B.1)
Offside Front Body has a projection caused by corrosion outer sill (6.1.C.1)
Offside Front coil spring broken (2.4.C.1a)
Offside front brake binding (3.7.B.1)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
n/s and o/s rear tyres cracking in treads
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
n/s and o/s rear tyres cracking in treads
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside front brake binding (3.7.B.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Offside front brake binding (3.7.B.1)
n/s front tyre sidewall starting to crack
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EX06 SYO is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EX06 SYO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EX06 SYO?
You can check the full history of EX06 SYO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EX06 SYO registered?
EX06 SYO is a 2006 Ford Ka, first registered on 9 March 2006.
Is EX06 SYO safe to buy?
The MOT history for EX06 SYO shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EX06 SYO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EX06 SYO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.