2002 Ford Galaxy

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Passenger seat(s) missing at time of test ()

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement D bushes (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

engine covers & undertrays fitted

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Stop lamp not working all (1.2.1b)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Passenger seat(s) missing at time of test ()

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement D bushes (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

engine covers & undertrays fitted

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded both (3.6.B.2c)

Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear tyre inner edge worn

Offside sill damaged

Rear Brake pipe slightly corroded both (3.6.B.2c)

both front tyres inner edges worn

both rear archs corroded

engine covers and under trays fitted

Bonnet retaining device ineffective (8.4.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded both (3.6.B.2c)

Offside Rear Inner Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear tyre inner edge worn

Offside sill damaged

Rear Brake pipe slightly corroded both (3.6.B.2c)

both front tyres inner edges worn

both rear archs corroded

engine covers and under trays fitted

Child seat fitted

Engine covers and undertrays fitted

Nearside Front Body has slight corrosion Jacking point (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Bonnet retaining device ineffective (8.4.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Child seat fitted

Engine covers and undertrays fitted

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Body has slight corrosion Jacking point (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside headlamp slightly insecure

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside headlamp slightly insecure

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Child seat fitted not allowing full inspection of adult belt

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Passenger seat(s) missing at time of test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Passenger seat(s) missing at time of test

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Rear registration plate deteriorated (6.3.1d)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)