2006 Lexus IS250

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security subframe mounts (6.2.2 (d) (i))

general corrosion

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords wall (5.2.3 (d) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security subframe mounts (6.2.2 (d) (i))

general corrosion

Nearside Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Boot lid cannot be secured in the closed position (6.2.1 (e))

Offside Front Service brake lagging in operation (1.2.1 (d))

Nearside Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Inner Tyre worn close to legal limit/worn on edge edge bald (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge edge bald (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)