2006 Mercedes-benz C

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view 3 chips in Zone B (3.2 (a) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Tyre on 2mm 205/55 R16 (5.2.3 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre worn close to legal limit/worn on edge Tyre on 3mm 205/55 R16 (5.2.3 (e))

Oil leak, but not excessive Engine oil leak (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake hose slightly deteriorated Both (1.1.12 (b) (ii))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Small hole in rear silencer (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 205/55 R16 (5.2.3 (d) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view 3 chips in Zone B (3.2 (a) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Tyre on 2mm 205/55 R16 (5.2.3 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre worn close to legal limit/worn on edge Tyre on 3mm 205/55 R16 (5.2.3 (e))

Oil leak, but not excessive Engine oil leak (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake hose slightly deteriorated Both (1.1.12 (b) (ii))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Small hole in rear silencer (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive Engine oil leak (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Front engine cover fitted/under tray

Rear Brake pad(s) wearing thin 70% (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Headlamp aim too high (1.8)