2016 Ktm 125

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear PLAY IN REAR CUSH DRIVE ASSEMBLY.

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear PLAY IN REAR CUSH DRIVE ASSEMBLY.

Rear reflector missing (4.8.2 (a) (ii))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

All direction indicators missing (4.4.1 (a) (ii))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Clutch Leaver Pivot Worn

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Offside Rear Footrest missing (6.2.12 (a))

Front Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

Clutch Leaver Pivot Worn

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Brake pedal anti-slip provision missing (1.1.2 (c))

Drive chain sprocket excessively loose CUSH DRIVE RUBBERS (6.1.7 (c) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake lagging in operation (1.2.1 (d))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Brake excessively binding (1.2.1 (f))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside GEAR LEVER RUBBER MISSING

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment Control 1 (1.1.15 (f))

Brake lever is so short that the brake cannot be readily applied Control 2 (1.1.2 (d))

Drive chain excessively loose (6.1.7 (c) (i))

Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Drive chain dry