MOT Status
ExpiredMileage
14,739 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive GEAR BOX (NOISY) (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened AXLE (5.3.3 (b) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength AXLE MOUNT (5.3.6 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm pin or bush excessively worn REAR BUSH (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive GEAR BOX (NOISY) (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened AXLE (5.3.3 (b) (i))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material TO FLEXY HOSE (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement REAR BUSH (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material TO FLEXY HOSE (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
front head lights slightly deteriorated
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
front head lights slightly deteriorated
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp excessively deteriorated so that the light output is severely reduced dim (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp excessively deteriorated so that the light output is severely reduced dim (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s and o/s front brake discs corroded on insides
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Headlamp aim too low (1.8)
Offside Front brake disc slightly pitted (3.5.1h)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EY06 ZBF is a 2006 Peugeot 107 in Yellow with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying EY06 ZBF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of EY06 ZBF?
You can check the full history of EY06 ZBF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EY06 ZBF registered?
EY06 ZBF is a 2006 Peugeot 107, first registered on 31 March 2006.
Is EY06 ZBF safe to buy?
The MOT history for EY06 ZBF shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EY06 ZBF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EY06 ZBF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.