2006 Peugeot 206

Exhaust emits black smoke during acceleration (8.2.1.2 (g))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Underbody corrosion

Emissions not tested Co2high, leak (8.2.1.2 (d))

Nearside Front Passenger's seat with a defective structure (6.2.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Driver's seat moving inadvertently (6.2.5 (b) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Underbody corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

both front top mounts poor(slightly notchy)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front coil spring corroded (2.4.C.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leaking.

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front constant velocity joint is insecure not clip on (2.5.C.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front coil spring corroded (2.4.C.1b)

Headlamp aim too low (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leaking.

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

suspension significantly lowered, reducing suspension travel

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Headlamp aim too high (1.8)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

suspension significantly lowered, reducing suspension travel

Rear fog lamp not working (1.3.2b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Tyre has ply or cords exposed (4.1.D.1b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

front brake application uneven (3.7.B.2) DANGEROUS

Nearside Front Steering pivot point has slight play (2.2.B.1g)

front discs cxorroded and worn

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Steering pivot point has slight play (2.2.B.1g)

front discs cxorroded and worn

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

slight play in o/s/f inner rack joint

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)