MOT Status
ExpiredMileage
77,362 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Rear Upper inner wheel arch corroded by filler neck
underbody corrosion
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Windscreen damaged but not adversely affecting driver's view cracked (3.2 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Windscreen damaged but not adversely affecting driver's view cracked (3.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Offside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside & offside (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front tyre is worn on outer edge
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside & offside (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front tyre is worn on outer edge
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside & offside (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front tyre worn on outer edge
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
parts of exhaust system deteriorated by corrosion
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside front tyre worn on outer edge
parts of exhaust system deteriorated by corrosion
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
parts of exhaust system corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering component(s) has slight seepage from a component (2.3.3b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre worn on edges
offside rear tyre cracked
parts of exhaust system corroded
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside front tyre worn on outer edge
parts of exhaust system corroded
rear tyres cracked
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EY08 KDZ is a 2008 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying EY08 KDZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EY08 KDZ?
You can check the full history of EY08 KDZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EY08 KDZ registered?
EY08 KDZ is a 2008 Ford Ka, first registered on 1 March 2008.
Is EY08 KDZ safe to buy?
The MOT history for EY08 KDZ shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EY08 KDZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EY08 KDZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.