2011 Piaggio Vespa LX 125

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced near rear suspension (6.1.1 (c) (i))

Rear Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake disc(s) excessively scored (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Fuel cap sealing washer missing (7.2.2c)

Headlamp aim too low (1.6)

Nearside Brake lever mounting insecure (3.1.2a)

Nearside Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Steering headbearing has excessive free play (2.2.2)

Nearside Brake lever is short but brake can still be readily applied (3.1.3c)

Offside Brake lever is bent but brake can still be readily applied (3.1.3c)

engine m.i.l. on

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lever insecure (3.1.2a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lever insecure (3.1.2a)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Nearside Brake lever is short but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

offside mirror head loose

speedo not working