2012 Hyundai IX35

Exhaust heat shield not fully secured at rear of the fuel tank

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Fuel tank corroded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension arm corroded but not seriously weakened both arms (5.3.3 (b) (i))

Exhaust mounting defective Rear heatshield loose (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm corroded but not seriously weakened Both rear arms (5.3.3 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Nail in tyre ()

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement traction control arm (front arm) (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement traction control arm (front arm) (5.3.4 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Rear Headlamp not working on dipped beam (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement traction control arm (front arm) (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement traction control arm (front arm) (5.3.4 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake disc significantly and obviously worn excessively scored (1.1.14 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. o/s low (1.2.1 (b) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Front Brakes imbalanced across an axle o/s slow (3.7.B.5b)

Nearside Side repeater has less than 50% of the light sources illuminating on mirror (1.4.A.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

rear parking (secondary) brakes imbalanced o/s slow (3.7.B.6b)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components