MOT Status
ExpiredMileage
104,375 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened Upper and lower (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened Upper and lower (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Corrosion inner wing
Nearside Slight corrosion outer sill
Offside Front Corrosion inner wing
Offside Slight corrosion inner and outer sill
Slight corrosion front chassis
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill (6.1.B.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor area (6.1.B.2)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor area (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
front brake excessively fluctuating (3.7.B.3)
Nearside Front Corrosion inner wing
Nearside Slight corrosion outer sill
Offside Front Corrosion inner wing
Offside Rear Brake disc corroded
Offside Slight corrosion inner and outer sill
Slight corrosion front chassis
Front Brakes imbalanced across an axle offside low (3.7.B.5b)
Front registration plate displaying a honeycomb or similar effect background (6.3.3)
Nearside Front Anti-roll bar linkage fractured (2.4.G.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate displaying a honeycomb or similar effect background (6.3.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside front brake slight binding
offside rear tyre inner wall splitting
exhaust becoming corroded
Braking system leaking (3.6.A.1)
Front registration plate background overprinted or shadowed with text (6.3.1e)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear registration plate background overprinted or shadowed with text (6.3.1e)
rear brake application uneven (3.7.B.2)
brake fluid level low
exhaust becoming corroded
offside rear brake disc corroded
Under-trays fitted obscuring some underside components
exhaust becoming corroded
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
front brake application uneven (3.7.B.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
Small cut to nearside rear tyre inner sidewall.
Front registration plate displaying a honeycomb or similar effect background (6.3.3)
Rear registration plate displaying a honeycomb or similar effect background (6.3.3)
Nearside Headlamp aim too high (1.8)
Nearside Rear brake caliper has restricted free movement (3.5.1k)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Headlamp aim too high (1.8)
Offside Rear brake caliper has restricted free movement (3.5.1k)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
propshaft seal at gear box leaking
Offside Rear Anti-roll bar linkage fractured (2.4.G.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
EY51 EWA is a 2001 Mazda MX-5 in Blue with a 1,840cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2001 Mazda MX-5 models, the average MOT pass rate is 74.1% with a typical mileage of 72,567 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying EY51 EWA, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 25 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of EY51 EWA?
You can check the full history of EY51 EWA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was EY51 EWA registered?
EY51 EWA is a 2001 Mazda MX-5, first registered on 1 September 2001.
Is EY51 EWA safe to buy?
The MOT history for EY51 EWA shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does EY51 EWA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on EY51 EWA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.