2006 Mercedes-benz C

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Lower Suspension arm ball joint excessively worn steel arm (5.3.4 (a) (i))

Nearside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn steel arm (5.3.4 (a) (i))

Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush aluminum arm (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush aluminum arm (5.3.4 (a) (i))

center exhaust hanger broken

Both front suspension lower arm bushes are getting deteriorated

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Under trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pad warning lamp indicating worn brake pads

engine management warning lamp indicates a fault

high level stop lamp not working

misting of oil on engine under tray

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' items on rear view mirror (8.3.1e)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Under trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pad warning lamp indicating worn brake pads

engine management warning lamp indicates a fault

high level stop lamp not working

misting of oil on engine under tray

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nail in offside rear tyre

Rear coil spring corroded (2.4.C.1b)

Oil leak

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Oil leak

Nearside front brake juddering slightly (3.7.A.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside front brake juddering slightly (3.7.A.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Headlamp aim too low (1.8)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nail in nearside front tyre

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pedal pad starting to wear