2015 Yamaha WR125

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Stop lamp does not illuminate by the operation of both brake controls front switch not working (4.3.2 (a) (iii)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Clutch lever worn/damaged, advise renewal.

Clutch perch damaged

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement rear suspension linkage (5.3.4 (a) (i))

front brake disc has buckle

front fork travel restricted

rear tyre slightly perished

Brake pivot excessively worn rear brake pivot/slider rubber missing (1.1.15 (b))

Front Wheel spoke excessively loose (5.2.2 (d))

Headlamp aim not tested (4.1.2 (b))

Headlamp insecure (4.1.1 (c))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement rear suspension linkage (5.3.4 (a) (i))

front brake disc has buckle

front fork travel restricted

rear tyre slightly perished

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Front Brake component is fractured (3.1.5)

Front Brake lever is damaged and the brake cannot be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel alignment incorrect which adversely affects the handling (2.5.1)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp insecure (1.2.3b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Motorcycle structure excessively damaged (6.1.1a) DANGEROUS

Rear suspension bush has slight free play (2.4.A2a(i))