1989 Volkswagen Caddy

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Exhaust system insecure (6.1.2 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / sill cover plate (5.3.6 (a) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear wheel arch area corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Outer sill / arch area corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front top mount bearing noisy

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount / bed area (5.3.6 (a) (i))

Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Outer sill / arch area corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front top mount bearing noisy

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear wheel arch area corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear wing area corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure (6.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear wheel arch area corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear wing area corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop area (6.1.1 (c) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Exhaust system insecure (6.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

various areas underside of vehicle corroded

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front wishbone mounting area (5.3.6 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear wishbone mounting area (floor pan) (5.3.6 (a) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

various areas underside of vehicle corroded

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor bed (6.1.1 (c) (i))

various areas underside of vehicle corroded

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Fuel pipe leaking (6.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wishbone rear mounting point (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring anchor point (5.3.6 (a) (i))

Rear Exhaust system insecure x2 rubber mounts missing (6.1.2 (a))

Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring anchor point (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake cable damaged but not to excess (1.1.15 (a))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor bed (6.1.1 (c) (i))

various areas underside of vehicle corroded

Fuel system component leaking (7.2.3)

Driver's seat insecure (6.2.A.1)

Horn not working (1.6.2a)

Nearside Front Coil spring mounting loose (2.4.C.3a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Headlamp aim too high (1.8)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Side repeater not working (1.4.A.2c)

Offside Headlamp aim too high (1.8)

Offside Seat belt anchorage prescribed area is severely distorted (5.2.6)

Offside Side repeater not working (1.4.A.2c)

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front registration plate insecure (6.3.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Horn not working (1.6.2a)

Offside Front Seat belt affected by an insecure seat fixing (5.2.1b)

Rear registration plate insecure (6.3.1b)

Centre Rear registration plate insecure (6.3.1b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front Front passenger seat insecure (6.2.3)

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Nearside Front Side repeater insecure (1.4.A.2b)

Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Rear Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a) DANGEROUS

Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Brake back plate(s) locking device insecure (3.5.1l)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Front registration plate insecure (6.3.1b)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Rear rear brake recording little or no effort (3.7.B.5a)