MOT Status
ValidMileage
180,064 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Fuel Pipe/s corroded ()
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Fuel cap/sealing device missing (6.1.3 (b) (i))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Fuel Pipe/s corroded ()
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both side (5.1.2 (b) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Fuel hose leaking (6.1.3 (b) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))
Nearside Front Brake hose bulging under pressure (3.6.B.3)
Nearside Rear Statutory seat belt missing (5.1.1)
Offside Front Brake hose bulging under pressure (3.6.B.3)
Offside Rear Statutory seat belt missing (5.1.1)
Fuel pipe/s corroded
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
OSF and NSF tyres wearing on edges
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the BMW 6 Series?
Based on 57,601 MOT tests across 6,687 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
F126 KGT is a 1989 BMW 6 Series in Black with a 3,430cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 1989 BMW 6 Series models, the average MOT pass rate is 73.1% with a typical mileage of 124,687 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 6 Series fails its MOT is tyre has ply or cords exposed, accounting for 533 recorded failures. If you're considering buying F126 KGT, it's worth having these areas checked by a mechanic before committing.
The BMW 6 Series typically stays on UK roads for around 41 years. At 37 years old, this BMW 6 Series is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of F126 KGT?
You can check the full history of F126 KGT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was F126 KGT registered?
F126 KGT is a 1989 BMW 6 Series, first registered on 17 March 1989.
Is F126 KGT safe to buy?
The MOT history for F126 KGT shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does F126 KGT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on F126 KGT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.