1988 Fiat Ducato

Bonnet cannot be secured in the closed position hinges broken away (3.1 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front ns and os inner wheel arches corroded slightly

Offside Front Bumper insecure slightly

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Leaf springs moved slightly, nearly touching tyres, ns and os

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Battery insecure (1.9.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Service brake: efficiency below requirements (3.7.B.7)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Exhaust has a part missing (7.1.1a)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Headlamp aim too low (1.8)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Brake pipe inadequately clipped (3.6.B.1)

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Offside Rear wheel bearing (2.6.1)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.5c)

Offside Rear wheel bearing (2.6.1)