1989 Mazda 323

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in rear of wheel arch (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in rear of wheel arch (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inside arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Rear and front suspension corroded

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Rear and front suspension corroded

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inside arch (6.1.1 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inside arch (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside front of arch (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (155/80r13) (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (155/80R13) (5.2.3 (e)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Offside rear brake binding (3.7.B.1)

Child seat fitted not allowing full inspection of adult belt

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside rear brake binding (3.7.B.1)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Stop lamp not working (1.2.1b)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)