1988 Piaggio Px 125

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicators not working (1.5.1c)

Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Nearside Steering lock stop ineffective (2.1.3)

Offside Steering lock stop ineffective (2.1.3)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever has inadequate reserve travel (3.1.3b)

Brake pedal has inadequate reserve travel (3.1.3b)

Direction indicators not working (1.5.1c)

Front Rear wheel has a missing wheel nut(s) (4.2.3a) DANGEROUS

Rear wheel insecure (4.2.3b) DANGEROUS

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b) DANGEROUS

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) DANGEROUS

Brake pedal has inadequate reserve travel (3.1.3b)

Offside Rear Direction indicator not working (1.5.1c)

no wiring for front stop light/never fitted

Brake lever cracked (3.1.2c)

Front Brake performance not tested (3.3)

Headlamp aim too high (1.6)

Indicator tell tale not functioning (1.5.2)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b) DANGEROUS