1989 Ford Fiesta

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill support plate (5.3.6 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

coolant leak

rear inner wheel arches corroded

strengthening plates fitted to floor n/s & o/s

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

strengthening plates fitted to floor n/s & o/s

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounts (5.3.6 (a) (i))

strengthening plates fitted to floors

Front Tyre worn close to legal limit/worn on edge n/s o/s (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

no passenger seats fitted at the time of test

corrosion present on floor various

corrosion present on front springs

offside and nearside rear shocks damp

Battery insecure (1.9.1)

Fuel pipe insecure (7.2.1)

Offside Rear wheel bearing has excessive play (2.6.2)

Registration plate lamp not working (1.1.C.1d)

corrosion present on floor various

corrosion present on front springs

offside and nearside rear shocks damp

Passenger seat(s) missing at time of test

Standard fitment seat belt missing

Wheel/tyre protruding beyond wheel arch

Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

slight corrosion of offside flitch behind bottle

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced (2.4.G.1)

rear brake binding (3.7.B.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)