1989 BMW 535

Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Brake hose slightly chafed on coil over (1.1.12 (b) (i))

all brake discs corroded

all brake hose ferrule corroded

All direction indicators not working (4.4.1 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Headlamp aim not tested both dip beams inop (4.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Seat belt installation anchorage insecure (10.1 (d))

Nearside Front Suspension arm ball joint excessively worn front arm (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))

Offside Front Seat belt installation anchorage insecure (10.1 (d))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Side repeater not working both (4.4.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Windscreen wiper not working (3.4 (a))

Offside Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Front Lower Suspension arm insecure (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in nearside rear tyre

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

centre exhaust rubber hanger starting to perrish

dent in nearside wing

end of nearside wiper blade split

nsf lower shock absorber retaining device isd of incorrect type but is secure at time of test

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

front brake application uneven (3.7.B.2)

nsf lower shock absorber retaining device isd of incorrect type but is secure at time of test

Centre Statutory seat belt missing (5.1.1)

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Ball joint has excessive play (2.2.B.1f)