1989 Kawasaki KMX125

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain horseshoe locking device incorrectly fitted Fitted open end towards direction of travel. (6.1.7 (j) (i))

Horn sound not in accordance with requirements Not loud enough (7.7 (c))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Horn not working (7.7 (a))

Rear Brake disc insecure four bolts missing (1.1.14 (a) (ii)) DANGEROUS

Rear Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Clutch lever shortened. (6.2.1g)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake pedal pivots slightly worn (3.1.3a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel spoke excessively loose (4.2.1b)

Headlamp aim too high (1.6)

Nearside Front Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp insecure (1.1.1c)

Rear suspension movement is excessively stiff (2.4.A.3b)

Registration plate insecure (6.3.1b)

Clutch lever shortened. (6.2.1g)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Brake pedal pivots slightly worn (3.1.3a)

fuel tank mountings worn

gear lever loose

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator insecure (1.5.3b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear mono-shock pivot seized (2.4.B.4)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension movement is excessively stiff (2.4.A.3b)

Registration plate insecure (6.3.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Clutch lever shortened. (6.2.1g)

fuel tank insecure

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Horn not working (1.7.3a)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)