MOT Status
ExpiredMileage
3,365 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear fog lamp not working (1.3.2b)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Welded repairs protected/partially covered with body filler making inspection difficult
Front registration plate deteriorated (6.3.1d)
Front registration plate insecure (6.3.1b)
Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Brake cable locking device missing (3.5.1l)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Welded repairs protected/partially covered with body filler making inspection difficult
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Exhaust engine idle speed too high (7.3.A.2a)
Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Front registration plate deteriorated (6.3.1d)
Front registration plate insecure (6.3.1b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
No front bumpstops
Rear radius arms movement stiff
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front bumpstops missing
offside rear radius arm partially seizing
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Lower engine stabalizer broken
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front bumpstops missing
offside rear radius arm partially seizing
slight noise from offside front wheel when rotating, no roughness felt
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Steering rack gaiter split (2.2.D.2d)
Offside front brake juddering severely (3.7.A.2b)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
no front bump stops
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front front brake juddering slightly (3.7.A.2b)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front front brake juddering slightly (3.7.A.2b)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Sub-frame attachment bracket/mounting insecure (2.4.G.1)
Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Headlamp aim too high (1.8)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake juddering severely (3.7.A.2b)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside front brake juddering slightly (3.7.A.2b)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
How Reliable is the Austin Mini 1000 City E?
Based on 44,703 MOT tests across 5,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
F30 XHG is a 1989 Austin Mini 1000 City E in Red with a 998cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 1989 Austin Mini 1000 City E models, the average MOT pass rate is 63.8% with a typical mileage of 57,985 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 3,881 recorded failures. If you're considering buying F30 XHG, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E typically stays on UK roads for around 44 years. At 37 years old, this Austin Mini 1000 City E is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of F30 XHG?
You can check the full history of F30 XHG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was F30 XHG registered?
F30 XHG is a 1989 Austin Mini 1000 City E, first registered on 3 February 1989.
Is F30 XHG safe to buy?
The MOT history for F30 XHG shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does F30 XHG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on F30 XHG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.