1989 Land Rover Defender

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

No roof fitted at time of test

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Rear shock absorbers weak

Rear suspension bump stops missing

Windscreen folded down at time of test

long travel at footbrake

Brake pedal has insufficient reserve movement (3.3.A.5)

Brake performance not tested Due to faults making the vehicle unsafe to drive (3.7.A.1)

Front registration plate obscured (6.3.1d)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Anti-roll bar attachment bracket/mounting nut missing Loose (2.4.G.1)

Offside Body has a sharp edge caused by corrosion (6.1.C.1)

Registration plate lamp not working (1.1.C.1d)

Bonnet cannot be secured in the closed position (8.4.1) DANGEROUS

Nearside Seat belt insecurely fixed to the vehicles structure (5.2.1a) DANGEROUS

Offside Seat belt insecurely fixed to the vehicles structure (5.2.1a) DANGEROUS

N/s/r hub seal leaking

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

No roof fitted at time of test

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Rear suspension bump stops missing

Tailgate made from mdf but secure

Vehicle presented with windscreen folded down at time of test

Rust, corrosion and welded patches in various places

brake test not carried out due to serious fluid leak

n/s/f steering arm boot split

patches covered in underseal

rear bump stops missing

rear crossmember corroded

Bonnet cannot be secured in the closed position (8.4.1)

Brake fluid warning lamp inoperative (3.6.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Front Brake hose inappropriately repaired (3.6.A.3)

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake hose inappropriately repaired (3.6.A.3)

Offside Front Braking system leaking (3.6.A.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Braking system leaking Too dangerous to carry out brake test (3.6.A.1) DANGEROUS

Rust, corrosion and welded patches in various places

brake test not carried out due to serious fluid leak

n/s/f steering arm boot split

rear bump stops missing

rear crossmember corroded

front exhaust clamp loose

Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Upper Shock absorber insecure (2.7.2b)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

front exhaust clamp loose

handbrake high

handbrake just met limits

oil leaks

rust p[atches

Main beam 'tell-tale' not working (1.7.4c)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Side repeater not working (1.4.A.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

handbrake high

handbrake just met limits

n/s/r tyre close to limits

oil leaks

rust p[atches

Brake clevis joint locking device missing (3.5.1l)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Axle swivel joint has excessive play in a ball joint (2.5.A.3b)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pipe inadequately clipped (3.6.B.1)

Nearside Direction indicator flashing more than 120 times a minute (1.4.A.2g)

Nearside Front Brake pipe fouled by moving parts (3.6.B.2a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Drag link end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Shock absorber has negligible damping effect (2.7.5)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

front discs thin

front shocks rusty

front springs rusty

n/s/ body mounts getting rusty

n/s/f brake been binding / pads falling to bits

n/s/r spring/ shock mounts getting rusty

o/s/r bump stop missing

o/s/r tie rod mount getting rusty

oil leak

rear springs rusty

whole chassis very rusty inc body mounts

Movement in prop shaft rear u/j-advise attention ASAP

O/s rear anti roll bar link has slight movement

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear anti roll bar D bushes have slight movement

Two seat belts only fitted to rear

Drag link end ball joint has excessive play (2.2.B.1f)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Upper Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS

Movement in prop shaft rear u/j-advise attention ASAP

N/s front tyre worn close to limit

O/s rear anti roll bar link has slight movement

Rear anti roll bar D bushes have slight movement

Two seat belts only fitted to rear

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

oil leak from engine

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak