1989 Land Rover Defender

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Front floor corroded

Offside Front out rigger corroded and hole

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust deteriorated

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Side repeater not working (1.4.A.2c)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both front tyres are perrished.

nearside rear tyre is perrished.

Centre Exhaust system not adequately supported (7.1.1)

Offside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Parking brake lever has no reserve travel (3.1.6b)

clutch pedal heavey

exhaust laeking were welded

nearside front tyre wall cracked

offside rear tyre wall cracked

Oil leak

Power steering component(s) has slight seepage from a joint (2.3.3b)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Oil leak

Power steering component(s) has slight seepage from a joint (2.3.3b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Power steering component(s) has slight seepage from a component (2.3.3b)

top of offside front outrigger rusty

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Power steering malfunctioning (2.3.3a)

Power steering pipe(s) or hose(s) leaking (2.3.3b)

Registration plate lamp not working (1.1.5c)

Steering locking device insecure (2.2.C.1g)

Nearside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Power steering component(s) leaking from a failed seal (2.3.3b)

Rear Exhaust mounting missing (7.1.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Registration plate lamp not working (1.1.5c)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)