1988 Mazda 323

rear subframe has surface corrosion

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

general underside surface corrosion

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

general underside surface corrosion

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Coolant leak radiator

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis cross member under radiator by engine and gearbox mounting area (6.1.A.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Coolant leak radiator

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Windscreen wiper blade deteriorated (8.2.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)