1989 Fiat Ducato

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Centre Exhaust system not adequately supported (7.1.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Exhaust system not adequately supported (7.1.1)

Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength (5.2.6)

Nearside Windscreen wiper blade insecure (8.2.2)

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front front brake juddering severely (3.7.A.2b)

Offside Front Side repeater not working (1.4.A.2c)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

bat insecure

both front seats move slightly but secure

both n/s and o/s outer sills badly corroded

both rear shackle bushes worn

brake warning light on

exhaust system badly corroded

offside front inner wing badly corroded

offside front wheel arch badly corroded

Oil leak

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside front outersill corroded outside seatbelt mounting

Exhaust has a major leak of exhaust gases (7.1.2)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Upper Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pedal spongy (3.3.B.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Stop lamp not working (1.2.1b)

Steering column movement between the shaft and steering wheel (2.1.2b)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Leaf spring anchor bracket corroded but not seriously weakened (2.4.B.6d)

Nearside Rear Leaf spring shackle bracket corroded but not seriously weakened (2.4.B.6d)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Leaf spring anchor bracket corroded but not seriously weakened (2.4.B.6d)

Offside Rear Leaf spring shackle bracket corroded but not seriously weakened (2.4.B.6d)

heavy surface corrosion to offside rear and nearside rear brake back plates

slight noise from offside rear and nearside rear wheel bearings

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp insecure (1.7.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp insecure (1.7.3)

Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.5c)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

heavy surface corrosion to offside rear and nearside rear brake back plates

surface corrosion to offside front and nearside front brake discs

near side front inner wing starting to corrode.

number plate illumination near limit.

offside head lamp security on lower mounts near limit.