MOT Status
ExpiredMileage
21,626 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases various areas due to deterioration (6.1.2 (a))
Exhaust mounting defective various (6.1.2 (a))
Front Outer Brake hose has slight corrosion to ferrule o/s and n/s ferrules covered with wax oil substance (1.1.12 (f) (i))
Lower Steering column universal joint has slight wear or play (2.2.2 (c))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Nearside Rear Leaf spring anchor bracket corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Leaf spring anchor bracket corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Windscreen damaged but not adversely affecting driver's view damage to n/s and o/s lower corners of screen (3.2 (a) (i))
unable to fully inspect any front brake pads due to pads being shrouded by brake calipers
underside of vehicle body structure/components covered with large volume of a wax oil substance
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Road wheel fixing loose (5.2.1 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust has a minor leak of exhaust gases various areas due to deterioration (6.1.2 (a))
Exhaust mounting defective various (6.1.2 (a))
Front Outer Brake hose has slight corrosion to ferrule o/s and n/s ferrules covered with wax oil substance (1.1.12 (f) (i))
Lower Steering column universal joint has slight wear or play (2.2.2 (c))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Nearside Rear Leaf spring anchor bracket corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Leaf spring anchor bracket corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))
Windscreen damaged but not adversely affecting driver's view damage to n/s and o/s lower corners of screen (3.2 (a) (i))
unable to fully inspect any front brake pads due to pads being shrouded by brake calipers
underside of vehicle body structure/components covered with large volume of a wax oil substance
Emissions unable to be completed (8.2.2.2 (e))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill X1 (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area is inadequately repaired sill x2 (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x3 (5.3.6 (a) (i))
Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to rear (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x1 (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x5 (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch to rear of wheel (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to floor area (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by bump stop (6.1.1 (c) (i))
Rear Exhaust has a major leak of exhaust gases various holes in exhaust (6.1.2 (a))
Exhaust mounting defective all deteriorated (6.1.2 (a))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
vehicle undersealed heavily
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CAB STEP (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS OUT RIGGER MOUNTING (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CAB STEP (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS OUT RIGGER MOUNTING (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT CROSS MEMBER THROUGHOUT (6.1.1 (c) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced valance (not load bearing) (6.1.1 (c) (i))
advise attention to both front seats (security to frame)
both headlamp units in slightly poor condition only just met requirement(advise replacement units)
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced valance (not load bearing) (6.1.1 (c) (i))
advise attention to both front seats (security to frame)
both headlamp units in slightly poor condition only just met requirement(advise replacement units)
after market rear seats fitted with lap belts
headlamp aim only just met requirements
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and chassis (6.1.1 (c) (i))
after market rear seats fitted with lap belts
headlamp aim only just met requirements
Nearside Front step welded from inside (underside slightly corroded)
Nearside headlamp aim beam pattern only just met requiement
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member under radiator (6.1.1 (c) (i))
Nearside Front step welded from inside (underside slightly corroded)
Nearside headlamp aim beam pattern only just met requiement
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front step as been welded from inside (under side slightly corroded)
Nearside Rear Inner valance corrosion (not load bearing)
Nearside headlamp beam pattern only just met requirement
Nearside headlamp aim slightly high
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)
Nearside Headlamp aim too high (1.8)
Nearside Rear Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner and outer sill (6.1.B.2)
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)
Offside Headlamp aim too low (1.8)
Registration plate lamp not working both (1.1.C.1d)
Nearside Body has slight corrosion rear leaf spring front mounting (6.1.B.2)
Offside Rear Body has slight corrosion leaf spring front mount (6.1.B.2)
Corrosion front, rear, off side rear spring hangers
Off side front step corroded.
Body has slight corrosion (6.1.B.2)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Advise on front exhaust rubber mounts worn.
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Upper Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Offside Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Advise on front exhaust rubber mounts worn.
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
n/s/f chassis leg has corrosion , o/s/r spring hanger has corrosion front mount
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Windscreen wiper blade insecure (8.2.2)
n/s/f chassis leg has corrosion , o/s/r spring hanger has corrosion front mount
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
general corrsion underside
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front chassis rails starting to rust
Front chassis rails starting to rust
How Reliable is the Ford Camper?
Based on 5,097 MOT tests across 328 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
F511 SDG is a 1989 Ford Camper in White with a 1,993cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 1989 Ford Camper models, the average MOT pass rate is 71.1% with a typical mileage of 40,615 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Camper fails its MOT is suspension spring mounting prescribed area is excessively corroded, accounting for 136 recorded failures. If you're considering buying F511 SDG, it's worth having these areas checked by a mechanic before committing.
The Ford Camper typically stays on UK roads for around 54 years. At 37 years old, this Ford Camper is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of F511 SDG?
You can check the full history of F511 SDG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was F511 SDG registered?
F511 SDG is a 1989 Ford Camper, first registered on 17 January 1989.
Is F511 SDG safe to buy?
The MOT history for F511 SDG shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does F511 SDG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on F511 SDG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.