1989 Nissan 200 SX

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust noisy (8.1.1 (a))

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Front Body has slight corrosion Cross member (6.1.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Inner Body has slight corrosion Floor panel (6.1.B.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Inner Body has slight corrosion Sill (6.1.B.2)

Nearside Rear Outer Wall of tyre worn

Offside Front Tyre has cuts in tread but not showing cords

Offside Front coil spring corroded (2.4.C.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp aim too high (1.8)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear fog lamp missing (1.3.2a)

Nearside Front Vehicle structure has slight corrosion floor (6.1.A.1)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Front coil spring corroded (2.4.C.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

nearside rear tyre worn on outer wall

offside front tyre has cuts in tread but not showing cords

Exhaust engine idle speed too high unable to test emmisions (7.3.A.2a)

Front Body insecure and dangerous to other road users bumper (6.1.B.1b)

Front Suspension component mounting prescribed area is excessively corroded cross member, under radiator (2.4.A.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate missing (6.3.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Lower Suspension arm locating pin locking device missing (2.4.G.3b)

Nearside Rear Tyre fouling a part of the vehicle fouling wheel arch (4.1.D.2)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front anti-roll bar mounting bolt missing - has been welded

Offside Rear Outer c v gaiter split & insecure

Offside Rear anti-roll bar link bushes displaced

Rear seats missing at time of test

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

abs system removed

corrosion to floor chassis and rear inner sill

corrosion to rear sub-frame and suspension parts

suspension very hard -lowered

unable to check n/s/r and front wheel studs

Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Rear Wheel stud(s) missing (4.2.A.1e) DANGEROUS

abs system removed

corrosion to floor chassis and rear inner sill

corrosion to rear sub-frame and suspension parts

suspension very hard -lowered

unable to check n/s/r and front wheel studs

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Rear Lower Suspension arm locating pin locking device missing (2.4.G.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp missing (1.3.2a)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Track rod end ball joint has slight play (2.2.B.1f)

slight play in steering rack , abs unit removed no light on dash ,

fuel pipes are quite rusty

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Side repeater missing (1.4.A.2b)

Offside Side repeater missing (1.4.A.2b)

fuel pipes are quite rusty

exhaust held on with wire in places

holes drilled in both sill pannels for body kit ( strength not weakend )

racing seat belts fitted aswell as orginal belt so only factory seat belts checked

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

exhaust system is held on by wire in places

holes drill in both sill pannels for body kit to be fitted ( strength not weakend )

racing seat belts fitted aswell as orginal so only orginal tested

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Steering column flexible coupling has slight play (2.1.5)

n/s mirror glass cracked

rusty outer seals.

rusty rear disc. †

Front registration plate letter/figure incomplete (6.3.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Steering column flexible coupling has slight play (2.1.5)

rusty outer seals.

rusty rear disc