1989 Citroen C25

Nearside Front inner wheel arch corroded

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front inner wheel arch corroded

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking area (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing area (6.1.1 (c) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Side repeater light intensity significantly reduced (4.4.3 (a))

Brake servo inoperative (1.1.10 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Track rod end boot split slightly

Offside Front Front wheel bearing has slight play (2.5.A.3c)

corrosion to front brake disc inner faces

front brake discs corroded on inner faces

slight corrosion to n/s/f inner arch

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Stop lamp not working (1.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust system not adequately supported (7.1.1)

Nearside Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Obligatory mirror insecure (8.1.1)

Rear Registration plate lamp not working (1.1.C.1d)

Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)