1988 Toyota Land Cruiser

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Sill to floor (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill to floor (5.3.6 (a) (i))

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Offside wiper rubber tearing but clearing screen adequately at present

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Body corroded and holed at seatbelt anchorage point (5.2.6)

Offside Front Anti-roll bar attachment bracket/mounting bolt missing Centre D bush (2.4.G.1)

Offside Front Anti-roll bar attachment bracket/mounting insecure Inner D bush mounting (2.4.G.1)

Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired Filler used at seatbelt anchorage point (5.2.6)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside wiper rubber tearing but clearing screen adequately at present

Electrical wiring insecure (1.9.2a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Direction indicator not working (1.4.A.2c)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Battery insecure (1.9.1)

Electrical wiring insecure (1.9.2a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Fuel hose insecure (7.2.1) DANGEROUS

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a) DANGEROUS

Offside Outer Body has slight corrosion (6.1.B.2)

Oil leak

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Propshaft component defective

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust has a major leak of exhaust gases (7.1.2)

Fuel system component leaking (7.2.3)

Nearside Front Panhard rod has excessive play in a pin/bush (2.4.G.2)

Registration plate lamp not working (1.1.5c)

registration plate deteriorated (6.3.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Stop lamp not working (1.2.1b)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)