1989 Mercedes-benz 207 D

Nearside Front Inner member excess corrision not within prescribed area under front wheel arch

Offside Front Inner member excess corrision not within prescribed area under front wheel arch

Nearside Front Inner member excess corrision not within prescribed area under front wheel arch

Offside Front Inner member excess corrision not within prescribed area under front wheel arch

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Corrosion o/s & n/s/f inner wheel arch

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Corrosion o/s & n/s/f inner wheel arch

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect kick off wrong side (4.1.2 (c))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect kick off wrong side (4.1.2 (c))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front panel (5.3.6 (a) (i))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front radiator mount slightly corroded

Offside Front Steering component mounting prescribed area is corroded but not considered excessive cross member (2.1.2 (e) (i))

Offside Front Steering component mounting prescribed area is excessively corroded inner wing (2.1.2 (e) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Steering component mounting prescribed area is corroded but not considered excessive cross member (2.1.2 (e) (i))

Nearside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Steering box has relative movement between sector shaft and the drop arm (2.2.B.1b)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Headlamp aim beam image kick up to the offside (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

holed corrosion o/s/f door step outside of prescribed area

unable to fully inspect brake pipes due to underseal/grease coating

Exhaust system not adequately supported (7.1.1)

Offside Rear Direction indicator not working (1.4.A.2c)

holed corrosion o/s/f door step outside of prescribed area

unable to fully inspect brake pipes due to underseal/grease coating

Exhaust has a minor leak of exhaust gases (7.1.2)

unable to fully inspect brake pipes due to grease

Nearside Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Exhaust has a minor leak of exhaust gases (7.1.2)

unable to fully inspect brake pipes due to grease

Exhaust has a minor leak of exhaust gases (7.1.2)

steering ball joint dust covers split

Exhaust has part of the system slightly deteriorated (7.1.1a)

note; unanble to fully inspect brake pipes due to being heavily greased

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

note; unanble to fully inspect brake pipes due to being heavily greased

advise full assesment of rear tow bar mountings not done due to internal fittings.advise further inspection by presenter

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

advise full assesment of rear tow bar mountings not done due to internal fittings.advise further inspection by presenter

Offside rear brake recording little or no effort (3.7.B.5a)