1989 Austin Mini Racing Flame

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Exhaust has a minor leak of exhaust gases Downpipe (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect limited damping (5.3.2 (b))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Exhaust has a minor leak of exhaust gases Downpipe (6.1.2 (a))

Nearside Front Shock absorbers light misting of oil or has limited damping effect limited damping (5.3.2 (b))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Horn not working properly (7.7 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top shock mount (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Welding repairs heavily undersealed

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Welding repairs heavily undersealed

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floorpan/inner sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner arch rear mounting point (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floorpan/inner sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/arch (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch rear mounting point (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Door sill excessively corroded but not within prescribed area

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Door sill excessively corroded but not within prescribed area

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

age cracks on both rear tyres

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside front brake application uneven (3.7.B.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Rear fog lamp not working (1.3.2b)