1989 Fiat Panda

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Front Inner Play in steering rack inner joint(s) ()

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Bushes splitting (5.3.4 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Outrigger holed but not in a prescribed area (6.1.1 (c) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Bushes splitting (5.3.4 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)

Offside Headlamp aim too low (1.8)

Offside Rear Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt oil leak (2.5.C.1a)

front prop shaft missing

Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Fuel tank leaking (7.2.3)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Play in prop-shaft centre bearing

Spare tyre defective

advanced rust to underside and to all perscribed areas

all metal brake pipes covered in grease

front and rear inner wing covers fitted

front wiper blade poor

offside front tyre perished

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Play in prop-shaft centre bearing

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

Spare tyre defective

advanced rust to underside and to all perscribed areas

all metal brake pipes covered in grease

front and rear inner wing covers fitted

front wiper blade poor

offside front tyre perished

Battery insecure

Spare tyre defective

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Battery insecure

Spare tyre defective

Fuel tank leaking (7.2.3)

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake balance just within limits

Offside front seat belt stalk release button has to be operated to attach belt

welding on nearside of car is of poor quality

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Coolant leak

welding on nearside of car is of poor quality

both front metal brake pipes corroded

front anti roll bar bushes perished

fuel tank corroded at rear

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both front lower arm inner bushs splitting

both front tie rod front bushes splitting

brake pedle slightly spongy

rear exhaust mount needs to be replaced