1989 Austin Mini 1000 City E

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing all 4 (5.2.3 (d) (ii))

all underside undersealed

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Fuel system component leaking carb (6.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

general underside corrosion

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Direction indicators not working (1.4.A.2c)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp insecure (1.3.2a)

Rear Exhaust system not adequately supported (7.1.1)

n/s/f top & bottom ball joints slight play

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)