1989 Peugeot 205

Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Horn not working (7.7 (a))

Oil leaking excessively from engine (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Front Position lamp not working nearside and offside. (4.2.1 (a) (ii))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Nearside Front Lower Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Stub axle has slight vertical movement between stub axle and axle beam slight play in axle bearings. (5.1.2 (c) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear corroded at front. (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak ()

front brake pipe slightly corroded,

brake lines routed incorrectly but secure

corrosion to nearside inner arch

Nearside Front Headlamp aim too low (1.8)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive b post base /sill (5.2.6)

drivers seat

rear bump stops missing

slight oil leak

Battery insecure (1.9.1)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Brake pipe inadequately supported (3.6.B.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear fog lamp not working (1.3.2b)

Front Brake pipe slightly corroded (3.6.B.2c)

rear bump stops missing

slight bloww on exhaust middle box